Skip to content
MOTCHECK
Beta

DVSA Statistics

2000 Iveco 3510
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2000 Iveco 3510 (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    A statutory seat belt missing

    33.3%
  2. 2

    Seat belt buckle missing, damaged or not functioning as intended

    33.3%
  3. 3

    A lens defective which has no effect on emitted light

    33.3%

Based on DVSA statistics from 2 recorded tests.

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco 3510.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2000 Iveco 3510 likely to fail its MOT?

Based on DVSA statistics, the 2000 Iveco 3510 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2000 Iveco 3510?

The most common MOT failure reasons for a 2000 Iveco 3510 are: a statutory seat belt missing, seat belt buckle missing, damaged or not functioning as intended, a lens defective which has no effect on emitted light. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2000 Iveco 3510 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a statutory seat belt missing, seat belt buckle missing, damaged or not functioning as intended, a lens defective which has no effect on emitted light. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2000 Iveco 3510s fail their MOT?

Around 50% of 2000 Iveco 3510s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a statutory seat belt missing and seat belt buckle missing, damaged or not functioning as intended. Pre-checking these items can significantly improve your chances.

What should I check before my 2000 Iveco 3510 MOT?

Before your 2000 Iveco 3510 MOT, check these commonly-failed items: a statutory seat belt missing, seat belt buckle missing, damaged or not functioning as intended, a lens defective which has no effect on emitted light. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2000 Iveco 3510 reliable for MOT?

With a 50% MOT pass rate, the 2000 Iveco 3510 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.