DVSA Statistics
1997 Iveco Bus
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1997 Iveco Bus (only 1 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 1 DVSA anonymised MOT tests · About this data
Pass Rate
0%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 1 recorded tests.
Pre-MOT Checklist for 1997 Iveco Bus
Based on common failure points for this model, check these items before your MOT:
- 1
Visually inspect coil springs for cracks or broken coils
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Bus.
Frequently Asked Questions
Is a 1997 Iveco Bus likely to fail its MOT?
Based on DVSA statistics, the 1997 Iveco Bus has a 0% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1997 Iveco Bus?
The most common MOT failure reasons for a 1997 Iveco Bus are: a spring with fixings loose to the extent that relative movement is visible, a suspension pin, bush or joint excessively worn. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1997 Iveco Bus fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a spring with fixings loose to the extent that relative movement is visible, a suspension pin, bush or joint excessively worn. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1997 Iveco Buss fail their MOT?
Around 100% of 1997 Iveco Buss fail their MOT test, meaning roughly 1 in 1 don't pass first time. The most common reasons are a spring with fixings loose to the extent that relative movement is visible and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1997 Iveco Bus MOT?
Before your 1997 Iveco Bus MOT, check these commonly-failed items: a spring with fixings loose to the extent that relative movement is visible, a suspension pin, bush or joint excessively worn. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1997 Iveco Bus reliable for MOT?
With a 0% MOT pass rate, the 1997 Iveco Bus performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.