DVSA Statistics
2009 Iveco Daily 35c18 Lwb
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2009 Iveco Daily 35c18 Lwb (only 27 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 27 DVSA anonymised MOT tests · About this data
Pass Rate
63%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 27 recorded tests.
Pre-MOT Checklist for 2009 Iveco Daily 35c18 Lwb
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Daily 35c18 Lwb.
Frequently Asked Questions
Is a 2009 Iveco Daily 35c18 Lwb likely to fail its MOT?
Based on DVSA statistics, the 2009 Iveco Daily 35c18 Lwb has a 63% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2009 Iveco Daily 35c18 Lwb?
The most common MOT failure reasons for a 2009 Iveco Daily 35c18 Lwb are: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn, tyre tread depth not in accordance with the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2009 Iveco Daily 35c18 Lwb fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn, tyre tread depth not in accordance with the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2009 Iveco Daily 35c18 Lwbs fail their MOT?
Around 37% of 2009 Iveco Daily 35c18 Lwbs fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2009 Iveco Daily 35c18 Lwb MOT?
Before your 2009 Iveco Daily 35c18 Lwb MOT, check these commonly-failed items: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn, tyre tread depth not in accordance with the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2009 Iveco Daily 35c18 Lwb reliable for MOT?
With a 63% MOT pass rate, the 2009 Iveco Daily 35c18 Lwb performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.