DVSA Statistics
2009 Iveco Daily 35s12 Hpi
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2009 Iveco Daily 35s12 Hpi (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2009 Iveco Daily 35s12 Hpi
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Daily 35s12 Hpi.
Frequently Asked Questions
Is a 2009 Iveco Daily 35s12 Hpi likely to fail its MOT?
Based on DVSA statistics, the 2009 Iveco Daily 35s12 Hpi has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2009 Iveco Daily 35s12 Hpi?
The most common MOT failure reasons for a 2009 Iveco Daily 35s12 Hpi are: a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a suspension component modified so that the suspension is operative or likely to fail. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2009 Iveco Daily 35s12 Hpi fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a suspension component modified so that the suspension is operative or likely to fail. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2009 Iveco Daily 35s12 Hpis fail their MOT?
Around 50% of 2009 Iveco Daily 35s12 Hpis fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps and a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Pre-checking these items can significantly improve your chances.
What should I check before my 2009 Iveco Daily 35s12 Hpi MOT?
Before your 2009 Iveco Daily 35s12 Hpi MOT, check these commonly-failed items: a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a suspension component modified so that the suspension is operative or likely to fail. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2009 Iveco Daily 35s12 Hpi reliable for MOT?
With a 50% MOT pass rate, the 2009 Iveco Daily 35s12 Hpi performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.