DVSA Statistics
2010 Iveco Daily 35s12 Mwb
MOT Pass Rate & Pre-MOT Checklist
Used 2010 Iveco Daily 35s12 Mwbs usually pass their MOT, but around 1 in 3 still fail, most often for a suspension pin, bush or joint excessively worn, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced and parking brake efficiency below minimum requirement. Based on 74 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 74 DVSA anonymised MOT tests · About this data
Pass Rate
67.6%
About average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 74 recorded tests.
Pre-MOT Checklist for 2010 Iveco Daily 35s12 Mwb
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Daily 35s12 Mwb.
Frequently Asked Questions
Is a 2010 Iveco Daily 35s12 Mwb likely to fail its MOT?
Based on DVSA statistics, the 2010 Iveco Daily 35s12 Mwb has a 67.6% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2010 Iveco Daily 35s12 Mwb?
The most common MOT failure reasons for a 2010 Iveco Daily 35s12 Mwb are: a suspension pin, bush or joint excessively worn, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, parking brake efficiency below minimum requirement. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Iveco Daily 35s12 Mwb fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, parking brake efficiency below minimum requirement. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Iveco Daily 35s12 Mwbs fail their MOT?
Around 32% of 2010 Iveco Daily 35s12 Mwbs fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Iveco Daily 35s12 Mwb MOT?
Before your 2010 Iveco Daily 35s12 Mwb MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, parking brake efficiency below minimum requirement. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Iveco Daily 35s12 Mwb reliable for MOT?
With a 67.6% MOT pass rate, the 2010 Iveco Daily 35s12 Mwb performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.