DVSA Statistics
2008 Iveco Daily 35s12 Swb S-A
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2008 Iveco Daily 35s12 Swb S-A (only 8 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 8 DVSA anonymised MOT tests · About this data
Pass Rate
75%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Check your mirrors for cracks or damage.
Based on DVSA statistics from 8 recorded tests.
Pre-MOT Checklist for 2008 Iveco Daily 35s12 Swb S-A
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Ensure all mirrors are secure, adjustable, and free from cracks
Visibility – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
How Does This Compare to Other Years?
Previous Year
2007 Iveco Daily 35s12 Swb S-A
Based on 3 UK MOT tests
Next Year
2009 Iveco Daily 35s12 Swb S-A
Based on 3 UK MOT tests
Compare how MOT performance varies across Iveco Daily 35s12 Swb S-A model years.
Why Trust This Data?
Official UK Government Source
This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.
Understanding the Statistics
This page is based on 8 MOT tests from the 2023 DVSA dataset. Your 2008 Iveco Daily 35s12 Swb S-A was 15 years old when this data was collected and is now 18 years old.
Sample Size
Limited data - 8 tests (use as rough guide only)
Limitations
Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Daily 35s12 Swb S-A.
Frequently Asked Questions
Is a 2008 Iveco Daily 35s12 Swb S-A likely to fail its MOT?
Based on DVSA statistics, the 2008 Iveco Daily 35s12 Swb S-A has a 75% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2008 Iveco Daily 35s12 Swb S-A?
The most common MOT failure reasons for a 2008 Iveco Daily 35s12 Swb S-A are: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, obligatory mirror or device slightly damaged or loose. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2008 Iveco Daily 35s12 Swb S-A fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, obligatory mirror or device slightly damaged or loose. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2008 Iveco Daily 35s12 Swb S-As fail their MOT?
Around 25% of 2008 Iveco Daily 35s12 Swb S-As fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 2008 Iveco Daily 35s12 Swb S-A MOT?
Before your 2008 Iveco Daily 35s12 Swb S-A MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, obligatory mirror or device slightly damaged or loose. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2008 Iveco Daily 35s12 Swb S-A reliable for MOT?
With a 75% MOT pass rate, the 2008 Iveco Daily 35s12 Swb S-A performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.