DVSA Statistics
2007 Iveco Daily 35s12 Swb
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2007 Iveco Daily 35s12 Swb (only 7 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 7 DVSA anonymised MOT tests · About this data
Pass Rate
57.1%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 7 recorded tests.
Pre-MOT Checklist for 2007 Iveco Daily 35s12 Swb
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 3
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Daily 35s12 Swb.
Frequently Asked Questions
Is a 2007 Iveco Daily 35s12 Swb likely to fail its MOT?
Based on DVSA statistics, the 2007 Iveco Daily 35s12 Swb has a 57.1% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2007 Iveco Daily 35s12 Swb?
The most common MOT failure reasons for a 2007 Iveco Daily 35s12 Swb are: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, body, cab or chassis excessively corroded at a mounting point, a suspension pin, bush or joint excessively worn. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2007 Iveco Daily 35s12 Swb fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, body, cab or chassis excessively corroded at a mounting point, a suspension pin, bush or joint excessively worn. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2007 Iveco Daily 35s12 Swbs fail their MOT?
Around 43% of 2007 Iveco Daily 35s12 Swbs fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced and body, cab or chassis excessively corroded at a mounting point. Pre-checking these items can significantly improve your chances.
What should I check before my 2007 Iveco Daily 35s12 Swb MOT?
Before your 2007 Iveco Daily 35s12 Swb MOT, check these commonly-failed items: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, body, cab or chassis excessively corroded at a mounting point, a suspension pin, bush or joint excessively worn. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2007 Iveco Daily 35s12 Swb reliable for MOT?
With a 57.1% MOT pass rate, the 2007 Iveco Daily 35s12 Swb performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.