Skip to content
MOTCHECK
Beta

DVSA Statistics

2008 Iveco Daily 35s12
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2008 Iveco Daily 35s12 (only 6 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 6 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:a brake lining or pad worn below 1.5mm
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    a brake lining or pad worn below 1.5mm

    14.3%
  2. 2

    Vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced

    14.3%
  3. 3

    Brake disc or drum excessively weakened, insecure or fractured

    14.3%
  4. 4

    A wheel bearing with excessive play

    7.1%
  5. 5

    Smoke opacity levels exceed the manufacturer's specified limit

    7.1%

Based on DVSA statistics from 6 recorded tests.

Pre-MOT Checklist for 2008 Iveco Daily 35s12

Based on common failure points for this model, check these items before your MOT:

  • 1

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Daily 35s12.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2008 Iveco Daily 35s12 likely to fail its MOT?

Based on DVSA statistics, the 2008 Iveco Daily 35s12 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2008 Iveco Daily 35s12?

The most common MOT failure reasons for a 2008 Iveco Daily 35s12 are: a brake lining or pad worn below 1.5mm, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, brake disc or drum excessively weakened, insecure or fractured. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2008 Iveco Daily 35s12 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a brake lining or pad worn below 1.5mm, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, brake disc or drum excessively weakened, insecure or fractured. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2008 Iveco Daily 35s12s fail their MOT?

Around 50% of 2008 Iveco Daily 35s12s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a brake lining or pad worn below 1.5mm and vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Pre-checking these items can significantly improve your chances.

What should I check before my 2008 Iveco Daily 35s12 MOT?

Before your 2008 Iveco Daily 35s12 MOT, check these commonly-failed items: a brake lining or pad worn below 1.5mm, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, brake disc or drum excessively weakened, insecure or fractured. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2008 Iveco Daily 35s12 reliable for MOT?

With a 50% MOT pass rate, the 2008 Iveco Daily 35s12 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.