DVSA Statistics
2012 Iveco Daily 35s13 Lwb
MOT Pass Rate & Pre-MOT Checklist
Used 2012 Iveco Daily 35s13 Lwbs usually pass their MOT, but around 1 in 4 still fail, most often for a suspension pin, bush or joint excessively worn, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning and a tyre seriously damaged. Based on 87 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 87 DVSA anonymised MOT tests · About this data
Pass Rate
73.6%
About average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 87 recorded tests.
Pre-MOT Checklist for 2012 Iveco Daily 35s13 Lwb
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Daily 35s13 Lwb.
Frequently Asked Questions
Is a 2012 Iveco Daily 35s13 Lwb likely to fail its MOT?
Based on DVSA statistics, the 2012 Iveco Daily 35s13 Lwb has a 73.6% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2012 Iveco Daily 35s13 Lwb?
The most common MOT failure reasons for a 2012 Iveco Daily 35s13 Lwb are: a suspension pin, bush or joint excessively worn, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a tyre seriously damaged. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2012 Iveco Daily 35s13 Lwb fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a tyre seriously damaged. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2012 Iveco Daily 35s13 Lwbs fail their MOT?
Around 26% of 2012 Iveco Daily 35s13 Lwbs fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Pre-checking these items can significantly improve your chances.
What should I check before my 2012 Iveco Daily 35s13 Lwb MOT?
Before your 2012 Iveco Daily 35s13 Lwb MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a tyre seriously damaged. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2012 Iveco Daily 35s13 Lwb reliable for MOT?
With a 73.6% MOT pass rate, the 2012 Iveco Daily 35s13 Lwb performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.