DVSA Statistics
2010 Iveco Daily 35s14 Mwb
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Iveco Daily 35s14 Mwb (only 10 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 10 DVSA anonymised MOT tests · About this data
Pass Rate
80%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Wiper blades are a common fail on DAILY 35S14 MWBs. Quick 5-minute fix.
Based on DVSA statistics from 10 recorded tests.
Pre-MOT Checklist for 2010 Iveco Daily 35s14 Mwb
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Daily 35s14 Mwb.
Frequently Asked Questions
Is a 2010 Iveco Daily 35s14 Mwb likely to fail its MOT?
Based on DVSA statistics, the 2010 Iveco Daily 35s14 Mwb has a 80% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Iveco Daily 35s14 Mwb?
The most common MOT failure reasons for a 2010 Iveco Daily 35s14 Mwb are: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn, wiper blade defective. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Iveco Daily 35s14 Mwb fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn, wiper blade defective. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Iveco Daily 35s14 Mwbs fail their MOT?
Around 20% of 2010 Iveco Daily 35s14 Mwbs fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Iveco Daily 35s14 Mwb MOT?
Before your 2010 Iveco Daily 35s14 Mwb MOT, check these commonly-failed items: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn, wiper blade defective. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Iveco Daily 35s14 Mwb reliable for MOT?
With a 80% MOT pass rate, the 2010 Iveco Daily 35s14 Mwb performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.