Skip to content
MOTCHECK
Beta

DVSA Statistics

2005 Iveco Daily 40c12
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2005 Iveco Daily 40c12 (only 7 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

85.7%

Pass Rate

Based on 7 DVSA anonymised MOT tests · About this data

Pass Rate

85.7%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:A brake hose ferrule excessively corroded
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    A brake hose ferrule excessively corroded

    25%
  2. 2

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    25%
  3. 3

    An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning

    12.5%
  4. 4

    A shock absorber damaged to the extent that it does not function or showing signs of severe leakage

    12.5%
  5. 5

    Brake pipe damaged or excessively corroded

    12.5%

Based on DVSA statistics from 7 recorded tests.

Pre-MOT Checklist for 2005 Iveco Daily 40c12

Based on common failure points for this model, check these items before your MOT:

  • 1

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

  • 2

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 3

    Test front and rear fog lights work - check warning light on dashboard

    Lighting – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Daily 40c12.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2005 Iveco Daily 40c12 likely to fail its MOT?

Based on DVSA statistics, the 2005 Iveco Daily 40c12 has a 85.7% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2005 Iveco Daily 40c12?

The most common MOT failure reasons for a 2005 Iveco Daily 40c12 are: a brake hose ferrule excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2005 Iveco Daily 40c12 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a brake hose ferrule excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2005 Iveco Daily 40c12s fail their MOT?

Around 14% of 2005 Iveco Daily 40c12s fail their MOT test, meaning roughly 1 in 7 don't pass first time. The most common reasons are a brake hose ferrule excessively corroded and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.

What should I check before my 2005 Iveco Daily 40c12 MOT?

Before your 2005 Iveco Daily 40c12 MOT, check these commonly-failed items: a brake hose ferrule excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2005 Iveco Daily 40c12 reliable for MOT?

With a 85.7% MOT pass rate, the 2005 Iveco Daily 40c12 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.