DVSA Statistics
2007 Iveco Daily 40c12
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2007 Iveco Daily 40c12 (only 16 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 16 DVSA anonymised MOT tests · About this data
Pass Rate
62.5%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 16 recorded tests.
Pre-MOT Checklist for 2007 Iveco Daily 40c12
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Daily 40c12.
Frequently Asked Questions
Is a 2007 Iveco Daily 40c12 likely to fail its MOT?
Based on DVSA statistics, the 2007 Iveco Daily 40c12 has a 62.5% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2007 Iveco Daily 40c12?
The most common MOT failure reasons for a 2007 Iveco Daily 40c12 are: body, cab or chassis excessively corroded at a mounting point, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a tyre over ten years old is fitted to a front steered axle of a bus, coach, or any axle on a minibus with a single wheel fitment. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2007 Iveco Daily 40c12 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: body, cab or chassis excessively corroded at a mounting point, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a tyre over ten years old is fitted to a front steered axle of a bus, coach, or any axle on a minibus with a single wheel fitment. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2007 Iveco Daily 40c12s fail their MOT?
Around 38% of 2007 Iveco Daily 40c12s fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are body, cab or chassis excessively corroded at a mounting point and vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Pre-checking these items can significantly improve your chances.
What should I check before my 2007 Iveco Daily 40c12 MOT?
Before your 2007 Iveco Daily 40c12 MOT, check these commonly-failed items: body, cab or chassis excessively corroded at a mounting point, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a tyre over ten years old is fitted to a front steered axle of a bus, coach, or any axle on a minibus with a single wheel fitment. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2007 Iveco Daily 40c12 reliable for MOT?
With a 62.5% MOT pass rate, the 2007 Iveco Daily 40c12 performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.