DVSA Statistics
2010 Iveco Daily 40c12
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Iveco Daily 40c12 (only 5 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 5 DVSA anonymised MOT tests · About this data
Pass Rate
80%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Windscreen wipers are easy to replace yourself.
Based on DVSA statistics from 5 recorded tests.
Pre-MOT Checklist for 2010 Iveco Daily 40c12
Based on common failure points for this model, check these items before your MOT:
- 1
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Ensure all doors open and close properly and latches engage
Bodywork – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Daily 40c12.
Frequently Asked Questions
Is a 2010 Iveco Daily 40c12 likely to fail its MOT?
Based on DVSA statistics, the 2010 Iveco Daily 40c12 has a 80% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Iveco Daily 40c12?
The most common MOT failure reasons for a 2010 Iveco Daily 40c12 are: windscreen washers not working or not providing sufficient fluid to clear the windscreen, a suspension component excessively damaged or corroded, a spring with fixings loose to the extent that relative movement is visible. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Iveco Daily 40c12 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: windscreen washers not working or not providing sufficient fluid to clear the windscreen, a suspension component excessively damaged or corroded, a spring with fixings loose to the extent that relative movement is visible. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Iveco Daily 40c12s fail their MOT?
Around 20% of 2010 Iveco Daily 40c12s fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are windscreen washers not working or not providing sufficient fluid to clear the windscreen and a suspension component excessively damaged or corroded. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Iveco Daily 40c12 MOT?
Before your 2010 Iveco Daily 40c12 MOT, check these commonly-failed items: windscreen washers not working or not providing sufficient fluid to clear the windscreen, a suspension component excessively damaged or corroded, a spring with fixings loose to the extent that relative movement is visible. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Iveco Daily 40c12 reliable for MOT?
With a 80% MOT pass rate, the 2010 Iveco Daily 40c12 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.