Skip to content
MOTCHECK
Beta

DVSA Statistics

2010 Iveco Daily 45c18
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2010 Iveco Daily 45c18 (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    A suspension pin, bush or joint excessively worn

    42.9%
  2. 2

    Engine MIL illuminated indicating a malfunction

    14.3%
  3. 3

    A rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources

    14.3%
  4. 4

    A shock absorber bush excessively worn

    14.3%
  5. 5

    A spring with fixings loose to the extent that relative movement is visible

    14.3%

Based on DVSA statistics from 2 recorded tests.

Pre-MOT Checklist for 2010 Iveco Daily 45c18

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Daily 45c18.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2010 Iveco Daily 45c18 likely to fail its MOT?

Based on DVSA statistics, the 2010 Iveco Daily 45c18 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2010 Iveco Daily 45c18?

The most common MOT failure reasons for a 2010 Iveco Daily 45c18 are: a suspension pin, bush or joint excessively worn, engine mil illuminated indicating a malfunction, a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2010 Iveco Daily 45c18 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, engine mil illuminated indicating a malfunction, a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2010 Iveco Daily 45c18s fail their MOT?

Around 50% of 2010 Iveco Daily 45c18s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and engine mil illuminated indicating a malfunction. Pre-checking these items can significantly improve your chances.

What should I check before my 2010 Iveco Daily 45c18 MOT?

Before your 2010 Iveco Daily 45c18 MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, engine mil illuminated indicating a malfunction, a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2010 Iveco Daily 45c18 reliable for MOT?

With a 50% MOT pass rate, the 2010 Iveco Daily 45c18 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.