DVSA Statistics
2000 Iveco Daliy 35s11
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2000 Iveco Daliy 35s11 (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2000 Iveco Daliy 35s11
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Ensure all doors open and close properly and latches engage
Bodywork – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Daliy 35s11.
Frequently Asked Questions
Is a 2000 Iveco Daliy 35s11 likely to fail its MOT?
Based on DVSA statistics, the 2000 Iveco Daliy 35s11 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2000 Iveco Daliy 35s11?
The most common MOT failure reasons for a 2000 Iveco Daliy 35s11 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a door hinge, catch or pillar missing or insecure, a body panel or body component damaged or corroded and likely to cause injury when grazed or contacted, or insecure. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2000 Iveco Daliy 35s11 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a door hinge, catch or pillar missing or insecure, a body panel or body component damaged or corroded and likely to cause injury when grazed or contacted, or insecure. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2000 Iveco Daliy 35s11s fail their MOT?
Around 50% of 2000 Iveco Daliy 35s11s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a door hinge, catch or pillar missing or insecure. Pre-checking these items can significantly improve your chances.
What should I check before my 2000 Iveco Daliy 35s11 MOT?
Before your 2000 Iveco Daliy 35s11 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a door hinge, catch or pillar missing or insecure, a body panel or body component damaged or corroded and likely to cause injury when grazed or contacted, or insecure. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2000 Iveco Daliy 35s11 reliable for MOT?
With a 50% MOT pass rate, the 2000 Iveco Daliy 35s11 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.