Skip to content
MOTCHECK
Beta

DVSA Statistics

2010 Iveco Unclassified
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2010 Iveco Unclassified (only 11 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

81.8%

Pass Rate

Based on 11 DVSA anonymised MOT tests · About this data

Pass Rate

81.8%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Brake pipe damaged or excessively corroded
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    Brake pipe damaged or excessively corroded

    16.7%
  2. 2

    Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users

    16.7%
  3. 3

    A reversing lamp inoperative

    8.3%
  4. 4

    An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning

    8.3%
  5. 5

    a brake lining or pad worn below 1.5mm

    8.3%

Based on DVSA statistics from 11 recorded tests.

Pre-MOT Checklist for 2010 Iveco Unclassified

Based on common failure points for this model, check these items before your MOT:

  • 1

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

  • 2

    Test front and rear fog lights work - check warning light on dashboard

    Lighting – Common fail on this model

Why Trust This Data?

Official UK Government Source

This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.

Understanding the Statistics

This page is based on 11 MOT tests from the 2023 DVSA dataset. Your 2010 Iveco Unclassified was 13 years old when this data was collected and is now 16 years old.

Sample Size

Limited data - 11 tests (use as rough guide only)

Limitations

Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Unclassified.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2010 Iveco Unclassified likely to fail its MOT?

Based on DVSA statistics, the 2010 Iveco Unclassified has a 81.8% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2010 Iveco Unclassified?

The most common MOT failure reasons for a 2010 Iveco Unclassified are: brake pipe damaged or excessively corroded, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a reversing lamp inoperative. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2010 Iveco Unclassified fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: brake pipe damaged or excessively corroded, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a reversing lamp inoperative. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2010 Iveco Unclassifieds fail their MOT?

Around 18% of 2010 Iveco Unclassifieds fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are brake pipe damaged or excessively corroded and fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Pre-checking these items can significantly improve your chances.

What should I check before my 2010 Iveco Unclassified MOT?

Before your 2010 Iveco Unclassified MOT, check these commonly-failed items: brake pipe damaged or excessively corroded, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a reversing lamp inoperative. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2010 Iveco Unclassified reliable for MOT?

With a 81.8% MOT pass rate, the 2010 Iveco Unclassified performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.