Skip to content
MOTCHECK
Beta

DVSA Statistics

2003 Jaguar Hurse
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2003 Jaguar Hurse (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    A suspension pin, bush or joint excessively worn

    33.3%
  2. 2

    ESC MIL indicates a system malfunction

    16.7%
  3. 3

    Warning device shows system malfunction

    16.7%
  4. 4

    The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired

    16.7%
  5. 5

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    16.7%

Based on DVSA statistics from 2 recorded tests.

Pre-MOT Checklist for 2003 Jaguar Hurse

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Jaguar Hurse.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2003 Jaguar Hurse likely to fail its MOT?

Based on DVSA statistics, the 2003 Jaguar Hurse has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2003 Jaguar Hurse?

The most common MOT failure reasons for a 2003 Jaguar Hurse are: a suspension pin, bush or joint excessively worn, esc mil indicates a system malfunction, warning device shows system malfunction. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2003 Jaguar Hurse fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, esc mil indicates a system malfunction, warning device shows system malfunction. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2003 Jaguar Hurses fail their MOT?

Around 50% of 2003 Jaguar Hurses fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and esc mil indicates a system malfunction. Pre-checking these items can significantly improve your chances.

What should I check before my 2003 Jaguar Hurse MOT?

Before your 2003 Jaguar Hurse MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, esc mil indicates a system malfunction, warning device shows system malfunction. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2003 Jaguar Hurse reliable for MOT?

With a 50% MOT pass rate, the 2003 Jaguar Hurse performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.