Skip to content
MOTCHECK
Beta

DVSA Statistics

2000 Jeep Cherokee Limited A
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2000 Jeep Cherokee Limited A (only 6 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

83.3%

Pass Rate

Based on 6 DVSA anonymised MOT tests · About this data

Pass Rate

83.3%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    A suspension pin, bush or joint excessively worn

    57.1%
  2. 2

    A wheel bearing with excessive play

    28.6%
  3. 3

    Lambda coefficient outside the default limits or the range specified by the manufacturer

    14.3%

Based on DVSA statistics from 6 recorded tests.

Pre-MOT Checklist for 2000 Jeep Cherokee Limited A

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Jeep Cherokee Limited A.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2000 Jeep Cherokee Limited A likely to fail its MOT?

Based on DVSA statistics, the 2000 Jeep Cherokee Limited A has a 83.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2000 Jeep Cherokee Limited A?

The most common MOT failure reasons for a 2000 Jeep Cherokee Limited A are: a suspension pin, bush or joint excessively worn, a wheel bearing with excessive play, lambda coefficient outside the default limits or the range specified by the manufacturer. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2000 Jeep Cherokee Limited A fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, a wheel bearing with excessive play, lambda coefficient outside the default limits or the range specified by the manufacturer. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2000 Jeep Cherokee Limited As fail their MOT?

Around 17% of 2000 Jeep Cherokee Limited As fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and a wheel bearing with excessive play. Pre-checking these items can significantly improve your chances.

What should I check before my 2000 Jeep Cherokee Limited A MOT?

Before your 2000 Jeep Cherokee Limited A MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, a wheel bearing with excessive play, lambda coefficient outside the default limits or the range specified by the manufacturer. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2000 Jeep Cherokee Limited A reliable for MOT?

With a 83.3% MOT pass rate, the 2000 Jeep Cherokee Limited A performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.