DVSA Statistics
2000 Jeep Cherokee Orvis Td
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2000 Jeep Cherokee Orvis Td (only 29 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 29 DVSA anonymised MOT tests · About this data
Pass Rate
79.3%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Wiper blades are a common fail on CHEROKEE ORVIS TDs. Quick 5-minute fix.
Based on DVSA statistics from 29 recorded tests.
Pre-MOT Checklist for 2000 Jeep Cherokee Orvis Td
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
- 3
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Jeep Cherokee Orvis Td.
Frequently Asked Questions
Is a 2000 Jeep Cherokee Orvis Td likely to fail its MOT?
Based on DVSA statistics, the 2000 Jeep Cherokee Orvis Td has a 79.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2000 Jeep Cherokee Orvis Td?
The most common MOT failure reasons for a 2000 Jeep Cherokee Orvis Td are: a suspension pin, bush or joint excessively worn, wiper blade missing or obviously not clearing the windscreen, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2000 Jeep Cherokee Orvis Td fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, wiper blade missing or obviously not clearing the windscreen, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2000 Jeep Cherokee Orvis Tds fail their MOT?
Around 21% of 2000 Jeep Cherokee Orvis Tds fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and wiper blade missing or obviously not clearing the windscreen. Pre-checking these items can significantly improve your chances.
What should I check before my 2000 Jeep Cherokee Orvis Td MOT?
Before your 2000 Jeep Cherokee Orvis Td MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, wiper blade missing or obviously not clearing the windscreen, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2000 Jeep Cherokee Orvis Td reliable for MOT?
With a 79.3% MOT pass rate, the 2000 Jeep Cherokee Orvis Td performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.