DVSA Statistics
2003 Jeep Cherokee
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2003 Jeep Cherokee (only 33 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 33 DVSA anonymised MOT tests · About this data
Pass Rate
66.7%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 33 recorded tests.
Pre-MOT Checklist for 2003 Jeep Cherokee
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Jeep Cherokee.
Frequently Asked Questions
Is a 2003 Jeep Cherokee likely to fail its MOT?
Based on DVSA statistics, the 2003 Jeep Cherokee has a 66.7% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2003 Jeep Cherokee?
The most common MOT failure reasons for a 2003 Jeep Cherokee are: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2003 Jeep Cherokee fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2003 Jeep Cherokees fail their MOT?
Around 33% of 2003 Jeep Cherokees fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 2003 Jeep Cherokee MOT?
Before your 2003 Jeep Cherokee MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2003 Jeep Cherokee reliable for MOT?
With a 66.7% MOT pass rate, the 2003 Jeep Cherokee performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.