DVSA Statistics
2012 Jeep Wrangler Overland Crd Unltd A
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2012 Jeep Wrangler Overland Crd Unltd A (only 29 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 29 DVSA anonymised MOT tests · About this data
Pass Rate
72.4%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 29 recorded tests.
Pre-MOT Checklist for 2012 Jeep Wrangler Overland Crd Unltd A
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 3
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 4
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Jeep Wrangler Overland Crd Unltd A.
Frequently Asked Questions
Is a 2012 Jeep Wrangler Overland Crd Unltd A likely to fail its MOT?
Based on DVSA statistics, the 2012 Jeep Wrangler Overland Crd Unltd A has a 72.4% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2012 Jeep Wrangler Overland Crd Unltd A?
The most common MOT failure reasons for a 2012 Jeep Wrangler Overland Crd Unltd A are: a brake lining or pad worn below 1.5mm, the aim of a headlamp is not within limits laid down in the requirements, a suspension pin, bush or joint excessively worn. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2012 Jeep Wrangler Overland Crd Unltd A fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a brake lining or pad worn below 1.5mm, the aim of a headlamp is not within limits laid down in the requirements, a suspension pin, bush or joint excessively worn. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2012 Jeep Wrangler Overland Crd Unltd As fail their MOT?
Around 28% of 2012 Jeep Wrangler Overland Crd Unltd As fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are a brake lining or pad worn below 1.5mm and the aim of a headlamp is not within limits laid down in the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 2012 Jeep Wrangler Overland Crd Unltd A MOT?
Before your 2012 Jeep Wrangler Overland Crd Unltd A MOT, check these commonly-failed items: a brake lining or pad worn below 1.5mm, the aim of a headlamp is not within limits laid down in the requirements, a suspension pin, bush or joint excessively worn. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2012 Jeep Wrangler Overland Crd Unltd A reliable for MOT?
With a 72.4% MOT pass rate, the 2012 Jeep Wrangler Overland Crd Unltd A performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.