DVSA Statistics
2009 Jinlun Jl 125-11
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2009 Jinlun Jl 125-11 (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2009 Jinlun Jl 125-11
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Jinlun Jl 125-11.
Frequently Asked Questions
Is a 2009 Jinlun Jl 125-11 likely to fail its MOT?
Based on DVSA statistics, the 2009 Jinlun Jl 125-11 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2009 Jinlun Jl 125-11?
The most common MOT failure reasons for a 2009 Jinlun Jl 125-11 are: a tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber, brake fluid not visible. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2009 Jinlun Jl 125-11 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber, brake fluid not visible. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2009 Jinlun Jl 125-11s fail their MOT?
Around 50% of 2009 Jinlun Jl 125-11s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber and brake fluid not visible. Pre-checking these items can significantly improve your chances.
What should I check before my 2009 Jinlun Jl 125-11 MOT?
Before your 2009 Jinlun Jl 125-11 MOT, check these commonly-failed items: a tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber, brake fluid not visible. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2009 Jinlun Jl 125-11 reliable for MOT?
With a 50% MOT pass rate, the 2009 Jinlun Jl 125-11 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.