DVSA Statistics
2010 Kawasaki Versys
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Kawasaki Versys (only 20 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 20 DVSA anonymised MOT tests · About this data
Pass Rate
90%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 20 recorded tests.
Pre-MOT Checklist for 2010 Kawasaki Versys
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 3
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Kawasaki Versys.
Frequently Asked Questions
Is a 2010 Kawasaki Versys likely to fail its MOT?
Based on DVSA statistics, the 2010 Kawasaki Versys has a 90% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Kawasaki Versys?
The most common MOT failure reasons for a 2010 Kawasaki Versys are: brake lining or pad worn below 1.0mm, a transmission belt, chain, sprocket or pulley excessively loose or worn, exhaust system leaking or insecure. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Kawasaki Versys fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake lining or pad worn below 1.0mm, a transmission belt, chain, sprocket or pulley excessively loose or worn, exhaust system leaking or insecure. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Kawasaki Versyss fail their MOT?
Around 10% of 2010 Kawasaki Versyss fail their MOT test, meaning roughly 1 in 10 don't pass first time. The most common reasons are brake lining or pad worn below 1.0mm and a transmission belt, chain, sprocket or pulley excessively loose or worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Kawasaki Versys MOT?
Before your 2010 Kawasaki Versys MOT, check these commonly-failed items: brake lining or pad worn below 1.0mm, a transmission belt, chain, sprocket or pulley excessively loose or worn, exhaust system leaking or insecure. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Kawasaki Versys reliable for MOT?
With a 90% MOT pass rate, the 2010 Kawasaki Versys performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.