DVSA Statistics
2006 Kawasaki Zr 1000 A2h
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2006 Kawasaki Zr 1000 A2h (only 6 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 6 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 6 recorded tests.
Pre-MOT Checklist for 2006 Kawasaki Zr 1000 A2h
Based on common failure points for this model, check these items before your MOT:
- 1
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
- 4
Ensure number plate lights work and plates are clean and legible
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Kawasaki Zr 1000 A2h.
Frequently Asked Questions
Is a 2006 Kawasaki Zr 1000 A2h likely to fail its MOT?
Based on DVSA statistics, the 2006 Kawasaki Zr 1000 A2h has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2006 Kawasaki Zr 1000 A2h?
The most common MOT failure reasons for a 2006 Kawasaki Zr 1000 A2h are: exhaust noise levels in excess of those permitted, lamp emitted colour, position or intensity not in accordance with the requirements, tyre tread depth not in accordance with the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2006 Kawasaki Zr 1000 A2h fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: exhaust noise levels in excess of those permitted, lamp emitted colour, position or intensity not in accordance with the requirements, tyre tread depth not in accordance with the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2006 Kawasaki Zr 1000 A2hs fail their MOT?
Around 50% of 2006 Kawasaki Zr 1000 A2hs fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are exhaust noise levels in excess of those permitted and lamp emitted colour, position or intensity not in accordance with the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 2006 Kawasaki Zr 1000 A2h MOT?
Before your 2006 Kawasaki Zr 1000 A2h MOT, check these commonly-failed items: exhaust noise levels in excess of those permitted, lamp emitted colour, position or intensity not in accordance with the requirements, tyre tread depth not in accordance with the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2006 Kawasaki Zr 1000 A2h reliable for MOT?
With a 50% MOT pass rate, the 2006 Kawasaki Zr 1000 A2h performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.