DVSA Statistics
2020 Kawasaki Zx 1002 Hlf Se
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2020 Kawasaki Zx 1002 Hlf Se (only 6 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 6 DVSA anonymised MOT tests · About this data
Pass Rate
83.3%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 6 recorded tests.
Pre-MOT Checklist for 2020 Kawasaki Zx 1002 Hlf Se
Based on common failure points for this model, check these items before your MOT:
- 1
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 2
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Kawasaki Zx 1002 Hlf Se.
Frequently Asked Questions
Is a 2020 Kawasaki Zx 1002 Hlf Se likely to fail its MOT?
Based on DVSA statistics, the 2020 Kawasaki Zx 1002 Hlf Se has a 83.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2020 Kawasaki Zx 1002 Hlf Se?
The most common MOT failure reasons for a 2020 Kawasaki Zx 1002 Hlf Se are: the aim of a headlamp is not within limits laid down in the requirements, a shock absorber bush excessively worn, exhaust noise levels in excess of those permitted. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2020 Kawasaki Zx 1002 Hlf Se fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the aim of a headlamp is not within limits laid down in the requirements, a shock absorber bush excessively worn, exhaust noise levels in excess of those permitted. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2020 Kawasaki Zx 1002 Hlf Ses fail their MOT?
Around 17% of 2020 Kawasaki Zx 1002 Hlf Ses fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are the aim of a headlamp is not within limits laid down in the requirements and a shock absorber bush excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2020 Kawasaki Zx 1002 Hlf Se MOT?
Before your 2020 Kawasaki Zx 1002 Hlf Se MOT, check these commonly-failed items: the aim of a headlamp is not within limits laid down in the requirements, a shock absorber bush excessively worn, exhaust noise levels in excess of those permitted. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2020 Kawasaki Zx 1002 Hlf Se reliable for MOT?
With a 83.3% MOT pass rate, the 2020 Kawasaki Zx 1002 Hlf Se performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.