DVSA Statistics
1989 Kawasaki Zx10
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1989 Kawasaki Zx10 (only 12 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 12 DVSA anonymised MOT tests · About this data
Pass Rate
83.3%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 12 recorded tests.
Pre-MOT Checklist for 1989 Kawasaki Zx10
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Kawasaki Zx10.
Frequently Asked Questions
Is a 1989 Kawasaki Zx10 likely to fail its MOT?
Based on DVSA statistics, the 1989 Kawasaki Zx10 has a 83.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1989 Kawasaki Zx10?
The most common MOT failure reasons for a 1989 Kawasaki Zx10 are: brake lining or pad worn below 1.0mm, fuel system leaking, or missing or ineffective filler cap, a suspension pin, bush or joint excessively worn. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1989 Kawasaki Zx10 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake lining or pad worn below 1.0mm, fuel system leaking, or missing or ineffective filler cap, a suspension pin, bush or joint excessively worn. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1989 Kawasaki Zx10s fail their MOT?
Around 17% of 1989 Kawasaki Zx10s fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are brake lining or pad worn below 1.0mm and fuel system leaking, or missing or ineffective filler cap. Pre-checking these items can significantly improve your chances.
What should I check before my 1989 Kawasaki Zx10 MOT?
Before your 1989 Kawasaki Zx10 MOT, check these commonly-failed items: brake lining or pad worn below 1.0mm, fuel system leaking, or missing or ineffective filler cap, a suspension pin, bush or joint excessively worn. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1989 Kawasaki Zx10 reliable for MOT?
With a 83.3% MOT pass rate, the 1989 Kawasaki Zx10 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.