Skip to content
MOTCHECK
Beta

DVSA Statistics

2006 Keeway Speed
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2006 Keeway Speed (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Quick DIY Fix

10 minutes fix
Save Money

Headlight bulbs are a common MOT fail. Easy DIY replacement.

Fixes:The aim of a headlamp is not within limits laid down in the requirements
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    Handlebar fractured, excessively deformed or excessively corroded

    25%
  2. 2

    The aim of a headlamp is not within limits laid down in the requirements

    25%
  3. 3

    A throttle control not functioning correctly

    25%
  4. 4

    A transmission belt or chain excessively tight

    25%

Based on DVSA statistics from 2 recorded tests.

Pre-MOT Checklist for 2006 Keeway Speed

Based on common failure points for this model, check these items before your MOT:

  • 1

    Test all headlights work and aim is correct - check for condensation inside

    Lighting – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Keeway Speed.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2006 Keeway Speed likely to fail its MOT?

Based on DVSA statistics, the 2006 Keeway Speed has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2006 Keeway Speed?

The most common MOT failure reasons for a 2006 Keeway Speed are: handlebar fractured, excessively deformed or excessively corroded, the aim of a headlamp is not within limits laid down in the requirements, a throttle control not functioning correctly. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2006 Keeway Speed fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: handlebar fractured, excessively deformed or excessively corroded, the aim of a headlamp is not within limits laid down in the requirements, a throttle control not functioning correctly. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2006 Keeway Speeds fail their MOT?

Around 50% of 2006 Keeway Speeds fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are handlebar fractured, excessively deformed or excessively corroded and the aim of a headlamp is not within limits laid down in the requirements. Pre-checking these items can significantly improve your chances.

What should I check before my 2006 Keeway Speed MOT?

Before your 2006 Keeway Speed MOT, check these commonly-failed items: handlebar fractured, excessively deformed or excessively corroded, the aim of a headlamp is not within limits laid down in the requirements, a throttle control not functioning correctly. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2006 Keeway Speed reliable for MOT?

With a 50% MOT pass rate, the 2006 Keeway Speed performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.