DVSA Statistics
2011 Ktm 250
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2011 Ktm 250 (only 33 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 33 DVSA anonymised MOT tests · About this data
Pass Rate
81.8%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Number plate lights are a quick fix.
Based on DVSA statistics from 33 recorded tests.
Pre-MOT Checklist for 2011 Ktm 250
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure number plate lights work and plates are clean and legible
Lighting – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ktm 250.
Frequently Asked Questions
Is a 2011 Ktm 250 likely to fail its MOT?
Based on DVSA statistics, the 2011 Ktm 250 has a 81.8% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2011 Ktm 250?
The most common MOT failure reasons for a 2011 Ktm 250 are: a transmission belt, chain, sprocket or pulley excessively loose or worn, number plate does not conform to the specified requirements, a tyre not fitted in accordance with the direction of rotation marked on the side wall. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2011 Ktm 250 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a transmission belt, chain, sprocket or pulley excessively loose or worn, number plate does not conform to the specified requirements, a tyre not fitted in accordance with the direction of rotation marked on the side wall. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2011 Ktm 250s fail their MOT?
Around 18% of 2011 Ktm 250s fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are a transmission belt, chain, sprocket or pulley excessively loose or worn and number plate does not conform to the specified requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 2011 Ktm 250 MOT?
Before your 2011 Ktm 250 MOT, check these commonly-failed items: a transmission belt, chain, sprocket or pulley excessively loose or worn, number plate does not conform to the specified requirements, a tyre not fitted in accordance with the direction of rotation marked on the side wall. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2011 Ktm 250 reliable for MOT?
With a 81.8% MOT pass rate, the 2011 Ktm 250 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.