DVSA Statistics
2008 Lambretta Pato 125n
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2008 Lambretta Pato 125n (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Indicator bulbs are quick and cheap to replace.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2008 Lambretta Pato 125n
Based on common failure points for this model, check these items before your MOT:
- 1
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Lambretta Pato 125n.
Frequently Asked Questions
Is a 2008 Lambretta Pato 125n likely to fail its MOT?
Based on DVSA statistics, the 2008 Lambretta Pato 125n has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2008 Lambretta Pato 125n?
The most common MOT failure reasons for a 2008 Lambretta Pato 125n are: a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a suspension component modified so that the suspension is inoperative or likely to fail other components. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2008 Lambretta Pato 125n fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a suspension component modified so that the suspension is inoperative or likely to fail other components. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2008 Lambretta Pato 125ns fail their MOT?
Around 50% of 2008 Lambretta Pato 125ns fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning and a suspension component modified so that the suspension is inoperative or likely to fail other components. Pre-checking these items can significantly improve your chances.
What should I check before my 2008 Lambretta Pato 125n MOT?
Before your 2008 Lambretta Pato 125n MOT, check these commonly-failed items: a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a suspension component modified so that the suspension is inoperative or likely to fail other components. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2008 Lambretta Pato 125n reliable for MOT?
With a 50% MOT pass rate, the 2008 Lambretta Pato 125n performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.