DVSA Statistics
2012 Lancia Fulvia
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2012 Lancia Fulvia (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2012 Lancia Fulvia
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check brake lights illuminate when pedal is pressed - have someone help you check
Lighting – Common fail on this model
- 3
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Lancia Fulvia.
Frequently Asked Questions
Is a 2012 Lancia Fulvia likely to fail its MOT?
Based on DVSA statistics, the 2012 Lancia Fulvia has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2012 Lancia Fulvia?
The most common MOT failure reasons for a 2012 Lancia Fulvia are: parking brake inoperative on one side, stop lamps all missing or inoperative, a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2012 Lancia Fulvia fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: parking brake inoperative on one side, stop lamps all missing or inoperative, a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2012 Lancia Fulvias fail their MOT?
Around 50% of 2012 Lancia Fulvias fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are parking brake inoperative on one side and stop lamps all missing or inoperative. Pre-checking these items can significantly improve your chances.
What should I check before my 2012 Lancia Fulvia MOT?
Before your 2012 Lancia Fulvia MOT, check these commonly-failed items: parking brake inoperative on one side, stop lamps all missing or inoperative, a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2012 Lancia Fulvia reliable for MOT?
With a 50% MOT pass rate, the 2012 Lancia Fulvia performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.