DVSA Statistics
1988 Land Rover 110 Station Wagon
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1988 Land Rover 110 Station Wagon (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1988 Land Rover 110 Station Wagon
Based on common failure points for this model, check these items before your MOT:
- 1
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Land Rover 110 Station Wagon.
Frequently Asked Questions
Is a 1988 Land Rover 110 Station Wagon likely to fail its MOT?
Based on DVSA statistics, the 1988 Land Rover 110 Station Wagon has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1988 Land Rover 110 Station Wagon?
The most common MOT failure reasons for a 1988 Land Rover 110 Station Wagon are: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1988 Land Rover 110 Station Wagon fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1988 Land Rover 110 Station Wagons fail their MOT?
Around 50% of 1988 Land Rover 110 Station Wagons fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired and a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Pre-checking these items can significantly improve your chances.
What should I check before my 1988 Land Rover 110 Station Wagon MOT?
Before your 1988 Land Rover 110 Station Wagon MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1988 Land Rover 110 Station Wagon reliable for MOT?
With a 50% MOT pass rate, the 1988 Land Rover 110 Station Wagon performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.