DVSA Statistics
2010 Land Rover 110
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Land Rover 110 (only 5 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 5 DVSA anonymised MOT tests · About this data
Pass Rate
80%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Number plate lights are a quick fix.
Based on DVSA statistics from 5 recorded tests.
Pre-MOT Checklist for 2010 Land Rover 110
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure number plate lights work and plates are clean and legible
Lighting – Common fail on this model
- 2
Visually inspect coil springs for cracks or broken coils
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Land Rover 110.
Frequently Asked Questions
Is a 2010 Land Rover 110 likely to fail its MOT?
Based on DVSA statistics, the 2010 Land Rover 110 has a 80% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Land Rover 110?
The most common MOT failure reasons for a 2010 Land Rover 110 are: fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, the strength or continuity of the load bearing structure within 30cm of any towbar mounting bracket is significantly reduced, a seat belt webbing or flexible stalk significantly stretched or weakened. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Land Rover 110 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, the strength or continuity of the load bearing structure within 30cm of any towbar mounting bracket is significantly reduced, a seat belt webbing or flexible stalk significantly stretched or weakened. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Land Rover 110s fail their MOT?
Around 20% of 2010 Land Rover 110s fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users and the strength or continuity of the load bearing structure within 30cm of any towbar mounting bracket is significantly reduced. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Land Rover 110 MOT?
Before your 2010 Land Rover 110 MOT, check these commonly-failed items: fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, the strength or continuity of the load bearing structure within 30cm of any towbar mounting bracket is significantly reduced, a seat belt webbing or flexible stalk significantly stretched or weakened. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Land Rover 110 reliable for MOT?
With a 80% MOT pass rate, the 2010 Land Rover 110 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.