DVSA Statistics
1986 Landrover Defender 110
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1986 Landrover Defender 110 (only 5 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 5 DVSA anonymised MOT tests · About this data
Pass Rate
60%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 5 recorded tests.
Pre-MOT Checklist for 1986 Landrover Defender 110
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 3
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
- 4
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Landrover Defender 110.
Frequently Asked Questions
Is a 1986 Landrover Defender 110 likely to fail its MOT?
Based on DVSA statistics, the 1986 Landrover Defender 110 has a 60% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 1986 Landrover Defender 110?
The most common MOT failure reasons for a 1986 Landrover Defender 110 are: brake pipe damaged or excessively corroded, exhaust system leaking or insecure, a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1986 Landrover Defender 110 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake pipe damaged or excessively corroded, exhaust system leaking or insecure, a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1986 Landrover Defender 110s fail their MOT?
Around 40% of 1986 Landrover Defender 110s fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are brake pipe damaged or excessively corroded and exhaust system leaking or insecure. Pre-checking these items can significantly improve your chances.
What should I check before my 1986 Landrover Defender 110 MOT?
Before your 1986 Landrover Defender 110 MOT, check these commonly-failed items: brake pipe damaged or excessively corroded, exhaust system leaking or insecure, a direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1986 Landrover Defender 110 reliable for MOT?
With a 60% MOT pass rate, the 1986 Landrover Defender 110 performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.