DVSA Statistics
2004 LDV 400 Convoy Td Swb
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2004 LDV 400 Convoy Td Swb (only 6 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 6 DVSA anonymised MOT tests · About this data
Pass Rate
66.7%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 6 recorded tests.
Pre-MOT Checklist for 2004 LDV 400 Convoy Td Swb
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact LDV 400 Convoy Td Swb.
Frequently Asked Questions
Is a 2004 LDV 400 Convoy Td Swb likely to fail its MOT?
Based on DVSA statistics, the 2004 LDV 400 Convoy Td Swb has a 66.7% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2004 LDV 400 Convoy Td Swb?
The most common MOT failure reasons for a 2004 LDV 400 Convoy Td Swb are: brake pipe damaged or excessively corroded, a suspension pin, bush or joint excessively worn, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2004 LDV 400 Convoy Td Swb fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake pipe damaged or excessively corroded, a suspension pin, bush or joint excessively worn, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2004 LDV 400 Convoy Td Swbs fail their MOT?
Around 33% of 2004 LDV 400 Convoy Td Swbs fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are brake pipe damaged or excessively corroded and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2004 LDV 400 Convoy Td Swb MOT?
Before your 2004 LDV 400 Convoy Td Swb MOT, check these commonly-failed items: brake pipe damaged or excessively corroded, a suspension pin, bush or joint excessively worn, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2004 LDV 400 Convoy Td Swb reliable for MOT?
With a 66.7% MOT pass rate, the 2004 LDV 400 Convoy Td Swb performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.