DVSA Statistics
2005 LDV Maxus 2.8 Cdi 95 Swb
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2005 LDV Maxus 2.8 Cdi 95 Swb (only 19 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 19 DVSA anonymised MOT tests · About this data
Pass Rate
73.7%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 19 recorded tests.
Pre-MOT Checklist for 2005 LDV Maxus 2.8 Cdi 95 Swb
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check brake lights illuminate when pedal is pressed - have someone help you check
Lighting – Common fail on this model
- 4
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
How Does This Compare to Other Years?
See how this 2005 model compares to the next model year.
Why Trust This Data?
Official UK Government Source
This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.
Understanding the Statistics
This page is based on 19 MOT tests from the 2023 DVSA dataset. Your 2005 LDV Maxus 2.8 Cdi 95 Swb was 18 years old when this data was collected and is now 21 years old.
Sample Size
Limited data - 19 tests (use as rough guide only)
Limitations
Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact LDV Maxus 2.8 Cdi 95 Swb.
Frequently Asked Questions
Is a 2005 LDV Maxus 2.8 Cdi 95 Swb likely to fail its MOT?
Based on DVSA statistics, the 2005 LDV Maxus 2.8 Cdi 95 Swb has a 73.7% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2005 LDV Maxus 2.8 Cdi 95 Swb?
The most common MOT failure reasons for a 2005 LDV Maxus 2.8 Cdi 95 Swb are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2005 LDV Maxus 2.8 Cdi 95 Swb fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2005 LDV Maxus 2.8 Cdi 95 Swbs fail their MOT?
Around 26% of 2005 LDV Maxus 2.8 Cdi 95 Swbs fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and brake pipe damaged or excessively corroded. Pre-checking these items can significantly improve your chances.
What should I check before my 2005 LDV Maxus 2.8 Cdi 95 Swb MOT?
Before your 2005 LDV Maxus 2.8 Cdi 95 Swb MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2005 LDV Maxus 2.8 Cdi 95 Swb reliable for MOT?
With a 73.7% MOT pass rate, the 2005 LDV Maxus 2.8 Cdi 95 Swb performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.