DVSA Statistics
2006 LDV Maxus
MOT Pass Rate & Pre-MOT Checklist
Used 2006 LDV Maxuss usually pass their MOT, but around 1 in 3 still fail, most often for brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Based on 1,249 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 1,249 DVSA anonymised MOT tests · About this data
Pass Rate
68.4%
About average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 1,249 recorded tests.
Pre-MOT Checklist for 2006 LDV Maxus
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact LDV Maxus.
Frequently Asked Questions
Is a 2006 LDV Maxus likely to fail its MOT?
Based on DVSA statistics, the 2006 LDV Maxus has a 68.4% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2006 LDV Maxus?
The most common MOT failure reasons for a 2006 LDV Maxus are: brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2006 LDV Maxus fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2006 LDV Maxuss fail their MOT?
Around 32% of 2006 LDV Maxuss fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are brake pipe damaged or excessively corroded and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 2006 LDV Maxus MOT?
Before your 2006 LDV Maxus MOT, check these commonly-failed items: brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2006 LDV Maxus reliable for MOT?
With a 68.4% MOT pass rate, the 2006 LDV Maxus performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.