DVSA Statistics
2018 Levc Tx
MOT Pass Rate & Pre-MOT Checklist
Used 2018 Levc Txs usually pass their MOT, but around 4% still fail, most often for a suspension pin, bush or joint excessively worn, a brake lining or pad worn below 1.5mm and brake disc or drum significantly and obviously worn. Based on 52 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 52 DVSA anonymised MOT tests · About this data
Pass Rate
96.2%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 52 recorded tests.
Pre-MOT Checklist for 2018 Levc Tx
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Levc Tx.
Frequently Asked Questions
Is a 2018 Levc Tx likely to fail its MOT?
Based on DVSA statistics, the 2018 Levc Tx has a 96.2% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2018 Levc Tx?
The most common MOT failure reasons for a 2018 Levc Tx are: a suspension pin, bush or joint excessively worn, a brake lining or pad worn below 1.5mm, brake disc or drum significantly and obviously worn. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2018 Levc Tx fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, a brake lining or pad worn below 1.5mm, brake disc or drum significantly and obviously worn. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2018 Levc Txs fail their MOT?
Around 4% of 2018 Levc Txs fail their MOT test. The most common reasons are a suspension pin, bush or joint excessively worn and a brake lining or pad worn below 1.5mm. Pre-checking these items can significantly improve your chances.
What should I check before my 2018 Levc Tx MOT?
Before your 2018 Levc Tx MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, a brake lining or pad worn below 1.5mm, brake disc or drum significantly and obviously worn. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2018 Levc Tx reliable for MOT?
With a 96.2% MOT pass rate, the 2018 Levc Tx performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.