DVSA Statistics
2013 Lexmoto Arrow 125
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2013 Lexmoto Arrow 125 (only 12 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 12 DVSA anonymised MOT tests · About this data
Pass Rate
58.3%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Brake light bulbs are easy to replace yourself.
Based on DVSA statistics from 12 recorded tests.
Pre-MOT Checklist for 2013 Lexmoto Arrow 125
Based on common failure points for this model, check these items before your MOT:
- 1
Check brake lights illuminate when pedal is pressed - have someone help you check
Lighting – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Lexmoto Arrow 125.
Frequently Asked Questions
Is a 2013 Lexmoto Arrow 125 likely to fail its MOT?
Based on DVSA statistics, the 2013 Lexmoto Arrow 125 has a 58.3% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2013 Lexmoto Arrow 125?
The most common MOT failure reasons for a 2013 Lexmoto Arrow 125 are: a footrest missing or insecure, a lamp missing or inoperative, stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2013 Lexmoto Arrow 125 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a footrest missing or insecure, a lamp missing or inoperative, stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2013 Lexmoto Arrow 125s fail their MOT?
Around 42% of 2013 Lexmoto Arrow 125s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a footrest missing or insecure and a lamp missing or inoperative. Pre-checking these items can significantly improve your chances.
What should I check before my 2013 Lexmoto Arrow 125 MOT?
Before your 2013 Lexmoto Arrow 125 MOT, check these commonly-failed items: a footrest missing or insecure, a lamp missing or inoperative, stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2013 Lexmoto Arrow 125 reliable for MOT?
With a 58.3% MOT pass rate, the 2013 Lexmoto Arrow 125 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.