DVSA Statistics
2010 Lexus Is 220d Se
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Lexus Is 220d Se (only 17 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 17 DVSA anonymised MOT tests · About this data
Pass Rate
82.4%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 17 recorded tests.
Pre-MOT Checklist for 2010 Lexus Is 220d Se
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
- 4
Check rear reflectors are present, clean, and not cracked
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Lexus Is 220d Se.
Frequently Asked Questions
Is a 2010 Lexus Is 220d Se likely to fail its MOT?
Based on DVSA statistics, the 2010 Lexus Is 220d Se has a 82.4% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Lexus Is 220d Se?
The most common MOT failure reasons for a 2010 Lexus Is 220d Se are: tyre tread depth not in accordance with the requirements, a tyre seriously damaged, excessive fluctuation in brake effort through each wheel revolution.. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Lexus Is 220d Se fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: tyre tread depth not in accordance with the requirements, a tyre seriously damaged, excessive fluctuation in brake effort through each wheel revolution.. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Lexus Is 220d Ses fail their MOT?
Around 18% of 2010 Lexus Is 220d Ses fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are tyre tread depth not in accordance with the requirements and a tyre seriously damaged. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Lexus Is 220d Se MOT?
Before your 2010 Lexus Is 220d Se MOT, check these commonly-failed items: tyre tread depth not in accordance with the requirements, a tyre seriously damaged, excessive fluctuation in brake effort through each wheel revolution.. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Lexus Is 220d Se reliable for MOT?
With a 82.4% MOT pass rate, the 2010 Lexus Is 220d Se performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.