DVSA Statistics
2010 Lotus Exige
MOT Pass Rate & Pre-MOT Checklist
Used 2010 Lotus Exiges usually pass their MOT, but around 5% still fail, most often for tyre tread depth not in accordance with the requirements, steering rack gaiter or ball joint dust cover damaged or deteriorated and a suspension pin, bush or joint excessively worn. Based on 64 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 64 DVSA anonymised MOT tests · About this data
Pass Rate
95.3%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 64 recorded tests.
Pre-MOT Checklist for 2010 Lotus Exige
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
- 3
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 4
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 5
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Lotus Exige.
Frequently Asked Questions
Is a 2010 Lotus Exige likely to fail its MOT?
Based on DVSA statistics, the 2010 Lotus Exige has a 95.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Lotus Exige?
The most common MOT failure reasons for a 2010 Lotus Exige are: tyre tread depth not in accordance with the requirements, steering rack gaiter or ball joint dust cover damaged or deteriorated, a suspension pin, bush or joint excessively worn. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Lotus Exige fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: tyre tread depth not in accordance with the requirements, steering rack gaiter or ball joint dust cover damaged or deteriorated, a suspension pin, bush or joint excessively worn. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Lotus Exiges fail their MOT?
Around 5% of 2010 Lotus Exiges fail their MOT test, meaning roughly 1 in 20 don't pass first time. The most common reasons are tyre tread depth not in accordance with the requirements and steering rack gaiter or ball joint dust cover damaged or deteriorated. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Lotus Exige MOT?
Before your 2010 Lotus Exige MOT, check these commonly-failed items: tyre tread depth not in accordance with the requirements, steering rack gaiter or ball joint dust cover damaged or deteriorated, a suspension pin, bush or joint excessively worn. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Lotus Exige reliable for MOT?
With a 95.3% MOT pass rate, the 2010 Lotus Exige performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.