Skip to content
MOTCHECK
Beta

DVSA Statistics

2006 Maybach 62
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2006 Maybach 62 (only 3 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

33.3%

Pass Rate

Based on 3 DVSA anonymised MOT tests · About this data

Pass Rate

33.3%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    A suspension joint dust cover missing or no longer prevents the ingress of dirt etc

    80%
  2. 2

    A wheel with a loose or missing wheel nut, bolt or stud

    20%

Based on DVSA statistics from 3 recorded tests.

Pre-MOT Checklist for 2006 Maybach 62

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Maybach 62.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2006 Maybach 62 likely to fail its MOT?

Based on DVSA statistics, the 2006 Maybach 62 has a 33.3% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2006 Maybach 62?

The most common MOT failure reasons for a 2006 Maybach 62 are: a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, a wheel with a loose or missing wheel nut, bolt or stud. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2006 Maybach 62 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, a wheel with a loose or missing wheel nut, bolt or stud. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2006 Maybach 62s fail their MOT?

Around 67% of 2006 Maybach 62s fail their MOT test, meaning roughly 1 in 1 don't pass first time. The most common reasons are a suspension joint dust cover missing or no longer prevents the ingress of dirt etc and a wheel with a loose or missing wheel nut, bolt or stud. Pre-checking these items can significantly improve your chances.

What should I check before my 2006 Maybach 62 MOT?

Before your 2006 Maybach 62 MOT, check these commonly-failed items: a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, a wheel with a loose or missing wheel nut, bolt or stud. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2006 Maybach 62 reliable for MOT?

With a 33.3% MOT pass rate, the 2006 Maybach 62 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.