Skip to content
MOTCHECK
Beta

DVSA Statistics

2005 Mazda Bongo Freinde
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2005 Mazda Bongo Freinde (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    A suspension pin, bush or joint excessively worn

    25%
  2. 2

    A suspension joint dust cover missing or no longer prevents the ingress of dirt etc

    25%
  3. 3

    Power steering fluid leaking or system malfunctioning

    25%
  4. 4

    Steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc

    25%

Based on DVSA statistics from 2 recorded tests.

Pre-MOT Checklist for 2005 Mazda Bongo Freinde

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Check for excessive play in steering wheel - should be minimal free movement

    Steering – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Bongo Freinde.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2005 Mazda Bongo Freinde likely to fail its MOT?

Based on DVSA statistics, the 2005 Mazda Bongo Freinde has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2005 Mazda Bongo Freinde?

The most common MOT failure reasons for a 2005 Mazda Bongo Freinde are: a suspension pin, bush or joint excessively worn, a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, power steering fluid leaking or system malfunctioning. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2005 Mazda Bongo Freinde fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, power steering fluid leaking or system malfunctioning. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2005 Mazda Bongo Freindes fail their MOT?

Around 50% of 2005 Mazda Bongo Freindes fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and a suspension joint dust cover missing or no longer prevents the ingress of dirt etc. Pre-checking these items can significantly improve your chances.

What should I check before my 2005 Mazda Bongo Freinde MOT?

Before your 2005 Mazda Bongo Freinde MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, power steering fluid leaking or system malfunctioning. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2005 Mazda Bongo Freinde reliable for MOT?

With a 50% MOT pass rate, the 2005 Mazda Bongo Freinde performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.