DVSA Statistics
2004 Mazda Bongo Freindee
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2004 Mazda Bongo Freindee (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Number plate lights are a quick fix.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2004 Mazda Bongo Freindee
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure number plate lights work and plates are clean and legible
Lighting – Common fail on this model
- 2
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Bongo Freindee.
Frequently Asked Questions
Is a 2004 Mazda Bongo Freindee likely to fail its MOT?
Based on DVSA statistics, the 2004 Mazda Bongo Freindee has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2004 Mazda Bongo Freindee?
The most common MOT failure reasons for a 2004 Mazda Bongo Freindee are: the strength or continuity of the load bearing structure within 30cm of any towbar mounting bracket is significantly reduced, number plate inscription missing or illegible, wiper blade missing or obviously not clearing the windscreen. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2004 Mazda Bongo Freindee fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any towbar mounting bracket is significantly reduced, number plate inscription missing or illegible, wiper blade missing or obviously not clearing the windscreen. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2004 Mazda Bongo Freindees fail their MOT?
Around 50% of 2004 Mazda Bongo Freindees fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any towbar mounting bracket is significantly reduced and number plate inscription missing or illegible. Pre-checking these items can significantly improve your chances.
What should I check before my 2004 Mazda Bongo Freindee MOT?
Before your 2004 Mazda Bongo Freindee MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any towbar mounting bracket is significantly reduced, number plate inscription missing or illegible, wiper blade missing or obviously not clearing the windscreen. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2004 Mazda Bongo Freindee reliable for MOT?
With a 50% MOT pass rate, the 2004 Mazda Bongo Freindee performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.