DVSA Statistics
2010 Mazda Bongo Friende
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Mazda Bongo Friende (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2010 Mazda Bongo Friende
Based on common failure points for this model, check these items before your MOT:
- 1
Test front and rear fog lights work - check warning light on dashboard
Lighting – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 3
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 4
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Bongo Friende.
Frequently Asked Questions
Is a 2010 Mazda Bongo Friende likely to fail its MOT?
Based on DVSA statistics, the 2010 Mazda Bongo Friende has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2010 Mazda Bongo Friende?
The most common MOT failure reasons for a 2010 Mazda Bongo Friende are: an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning, exhaust system leaking or insecure, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Mazda Bongo Friende fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning, exhaust system leaking or insecure, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Mazda Bongo Friendes fail their MOT?
Around 50% of 2010 Mazda Bongo Friendes fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning and exhaust system leaking or insecure. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Mazda Bongo Friende MOT?
Before your 2010 Mazda Bongo Friende MOT, check these commonly-failed items: an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning, exhaust system leaking or insecure, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Mazda Bongo Friende reliable for MOT?
With a 50% MOT pass rate, the 2010 Mazda Bongo Friende performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.