DVSA Statistics
1998 Mazda Bongo Friendee
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1998 Mazda Bongo Friendee (only 6 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 6 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 6 recorded tests.
Pre-MOT Checklist for 1998 Mazda Bongo Friendee
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Bongo Friendee.
Frequently Asked Questions
Is a 1998 Mazda Bongo Friendee likely to fail its MOT?
Based on DVSA statistics, the 1998 Mazda Bongo Friendee has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1998 Mazda Bongo Friendee?
The most common MOT failure reasons for a 1998 Mazda Bongo Friendee are: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, warning device shows system malfunction, significant brake effort recorded with no brake applied indicating a binding brake. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1998 Mazda Bongo Friendee fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, warning device shows system malfunction, significant brake effort recorded with no brake applied indicating a binding brake. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1998 Mazda Bongo Friendees fail their MOT?
Around 50% of 1998 Mazda Bongo Friendees fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired and warning device shows system malfunction. Pre-checking these items can significantly improve your chances.
What should I check before my 1998 Mazda Bongo Friendee MOT?
Before your 1998 Mazda Bongo Friendee MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, warning device shows system malfunction, significant brake effort recorded with no brake applied indicating a binding brake. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1998 Mazda Bongo Friendee reliable for MOT?
With a 50% MOT pass rate, the 1998 Mazda Bongo Friendee performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.