Skip to content
MOTCHECK
Beta

DVSA Statistics

2004 Mazda Bongo Sgl3 Camper
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2004 Mazda Bongo Sgl3 Camper (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Excessive fluctuation in brake effort through each wheel revolution.
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    39.1%
  2. 2

    The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired

    21.7%
  3. 3

    A suspension joint dust cover missing or no longer prevents the ingress of dirt etc

    8.7%
  4. 4

    Passenger seat(s) missing at time of test

    4.3%
  5. 5

    Excessive fluctuation in brake effort through each wheel revolution.

    4.3%

Based on DVSA statistics from 2 recorded tests.

Pre-MOT Checklist for 2004 Mazda Bongo Sgl3 Camper

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Bongo Sgl3 Camper.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2004 Mazda Bongo Sgl3 Camper likely to fail its MOT?

Based on DVSA statistics, the 2004 Mazda Bongo Sgl3 Camper has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2004 Mazda Bongo Sgl3 Camper?

The most common MOT failure reasons for a 2004 Mazda Bongo Sgl3 Camper are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension joint dust cover missing or no longer prevents the ingress of dirt etc. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2004 Mazda Bongo Sgl3 Camper fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension joint dust cover missing or no longer prevents the ingress of dirt etc. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2004 Mazda Bongo Sgl3 Campers fail their MOT?

Around 50% of 2004 Mazda Bongo Sgl3 Campers fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.

What should I check before my 2004 Mazda Bongo Sgl3 Camper MOT?

Before your 2004 Mazda Bongo Sgl3 Camper MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension joint dust cover missing or no longer prevents the ingress of dirt etc. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2004 Mazda Bongo Sgl3 Camper reliable for MOT?

With a 50% MOT pass rate, the 2004 Mazda Bongo Sgl3 Camper performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.