DVSA Statistics
2006 Mazda Bongo
MOT Pass Rate & Pre-MOT Checklist
Used 2006 Mazda Bongos usually pass their MOT, but around 1 in 3 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced and a suspension pin, bush or joint excessively worn. Based on 965 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 965 DVSA anonymised MOT tests · About this data
Pass Rate
65.6%
About average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 965 recorded tests.
Pre-MOT Checklist for 2006 Mazda Bongo
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
How Does This Compare to Other Years?
Previous Year
2005 Mazda Bongo
Based on 1,034 UK MOT tests
Next Year
2007 Mazda Bongo
Based on 1,061 UK MOT tests
The 2006 model has a lower pass rate than 2005, but performs better than 2007.
Why Trust This Data?
Official UK Government Source
This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.
Understanding the Statistics
This page is based on 965 MOT tests from the 2023 DVSA dataset. Your 2006 Mazda Bongo was 17 years old when this data was collected and is now 20 years old.
Sample Size
High confidence - 965 tests (statistically reliable)
Limitations
Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Bongo.
Frequently Asked Questions
Is a 2006 Mazda Bongo likely to fail its MOT?
Based on DVSA statistics, the 2006 Mazda Bongo has a 65.6% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2006 Mazda Bongo?
The most common MOT failure reasons for a 2006 Mazda Bongo are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2006 Mazda Bongo fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2006 Mazda Bongos fail their MOT?
Around 34% of 2006 Mazda Bongos fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Pre-checking these items can significantly improve your chances.
What should I check before my 2006 Mazda Bongo MOT?
Before your 2006 Mazda Bongo MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2006 Mazda Bongo reliable for MOT?
With a 65.6% MOT pass rate, the 2006 Mazda Bongo performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.