Skip to content
MOTCHECK
Beta

DVSA Statistics

2008 Mazda Bongoo
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2008 Mazda Bongoo (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    Fluid leaking continuously and likely to pose a serious risk to road safety

    20%
  2. 2

    Exhaust system leaking or insecure

    20%
  3. 3

    A suspension component missing, likely to become detached or directional stability impaired

    20%
  4. 4

    A rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources

    20%
  5. 5

    Power steering fluid leaking or system malfunctioning

    20%

Based on DVSA statistics from 2 recorded tests.

Pre-MOT Checklist for 2008 Mazda Bongoo

Based on common failure points for this model, check these items before your MOT:

  • 1

    Check exhaust for leaks, holes, or excessive corrosion - listen for blowing

    Exhaust – Common fail on this model

  • 2

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 3

    Check for excessive play in steering wheel - should be minimal free movement

    Steering – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Bongoo.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2008 Mazda Bongoo likely to fail its MOT?

Based on DVSA statistics, the 2008 Mazda Bongoo has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2008 Mazda Bongoo?

The most common MOT failure reasons for a 2008 Mazda Bongoo are: fluid leaking continuously and likely to pose a serious risk to road safety, exhaust system leaking or insecure, a suspension component missing, likely to become detached or directional stability impaired. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2008 Mazda Bongoo fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: fluid leaking continuously and likely to pose a serious risk to road safety, exhaust system leaking or insecure, a suspension component missing, likely to become detached or directional stability impaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2008 Mazda Bongoos fail their MOT?

Around 50% of 2008 Mazda Bongoos fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are fluid leaking continuously and likely to pose a serious risk to road safety and exhaust system leaking or insecure. Pre-checking these items can significantly improve your chances.

What should I check before my 2008 Mazda Bongoo MOT?

Before your 2008 Mazda Bongoo MOT, check these commonly-failed items: fluid leaking continuously and likely to pose a serious risk to road safety, exhaust system leaking or insecure, a suspension component missing, likely to become detached or directional stability impaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2008 Mazda Bongoo reliable for MOT?

With a 50% MOT pass rate, the 2008 Mazda Bongoo performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.