DVSA Statistics
2010 Mazda E Series
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Mazda E Series (only 12 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 12 DVSA anonymised MOT tests · About this data
Pass Rate
75%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Wiper blades are a common fail on E SERIESs. Quick 5-minute fix.
Based on DVSA statistics from 12 recorded tests.
Pre-MOT Checklist for 2010 Mazda E Series
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
- 3
Test front and rear fog lights work - check warning light on dashboard
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda E Series.
Frequently Asked Questions
Is a 2010 Mazda E Series likely to fail its MOT?
Based on DVSA statistics, the 2010 Mazda E Series has a 75% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Mazda E Series?
The most common MOT failure reasons for a 2010 Mazda E Series are: a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, wiper blade missing or obviously not clearing the windscreen, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Mazda E Series fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, wiper blade missing or obviously not clearing the windscreen, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Mazda E Seriess fail their MOT?
Around 25% of 2010 Mazda E Seriess fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are a suspension joint dust cover missing or no longer prevents the ingress of dirt etc and wiper blade missing or obviously not clearing the windscreen. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Mazda E Series MOT?
Before your 2010 Mazda E Series MOT, check these commonly-failed items: a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, wiper blade missing or obviously not clearing the windscreen, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Mazda E Series reliable for MOT?
With a 75% MOT pass rate, the 2010 Mazda E Series performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.