DVSA Statistics
2010 Mazda Friendee
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Mazda Friendee (only 30 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 30 DVSA anonymised MOT tests · About this data
Pass Rate
60%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 30 recorded tests.
Pre-MOT Checklist for 2010 Mazda Friendee
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Friendee.
Frequently Asked Questions
Is a 2010 Mazda Friendee likely to fail its MOT?
Based on DVSA statistics, the 2010 Mazda Friendee has a 60% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2010 Mazda Friendee?
The most common MOT failure reasons for a 2010 Mazda Friendee are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed default limits, significant brake effort recorded with no brake applied indicating a binding brake. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Mazda Friendee fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed default limits, significant brake effort recorded with no brake applied indicating a binding brake. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Mazda Friendees fail their MOT?
Around 40% of 2010 Mazda Friendees fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and emissions levels exceed default limits. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Mazda Friendee MOT?
Before your 2010 Mazda Friendee MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed default limits, significant brake effort recorded with no brake applied indicating a binding brake. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Mazda Friendee reliable for MOT?
With a 60% MOT pass rate, the 2010 Mazda Friendee performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.